C-Tec CFP AlarmSense Fire Panel 2-8 Zones - CFP-702-2AS

C Tec
SKU:
CFP-702-2AS
Availability:
Please Call for Availability
£216.00 (Inc. VAT)
£180.00 (Ex. VAT)
Current Stock:

C-Tec CFP AlarmSense Fire Panel 2-8 Zones - CFP-702-2AS

C-TEC's two-wire CFP AlarmSense® fire panel (CFP-702-2AS) is designed to work with Apollo's AlarmSense® range of detectors, call points, sounders and beacons.

Most conventional fire systems are designed to work with two pairs of wires per zone: one pair for detection devices such as smoke detectors, heat detectors and manual call points; the other for alarm devices such as bells, sounders or strobes. By using different voltage bands for quiescent and alarm states, AlarmSense® components can be connected to the same pair of supply wires.

When powered and controlled by the CFP two-wire fire panel, this reliable technology takes all the complexity out of fire alarm system design, leading to quicker, less expensive and more flexible installation. Indeed, research shows an AlarmSense® two-wire system can achieve a 20-25% reduction of labour over a standard four wire conventional system.

AlarmSense® devices are acceptable for BS 5839-1 and BS 5839-6 systems making them particularly useful for fire protection in Houses of Multiple Occupation (HMOs).

Please Note: This product is also as a 4 and 8 zone version.

 FEATURES:

  • Intuitive user-friendly interface with colour-coded buttons & combined keypad/keyswitch entry to access level 2
  • 2, 4 or 8 AlarmSense zone circuits (dependent on model purchased)
  • Four conventional sounder circuits
  • Integral 1.5A EN54-4/A2 compliant switch mode PSU
  • Wide range of engineering functions including zone test, coincidence, zone delay and non- latching zones
  • Two on-board relays (Fire and Fault)
  • Two open-collector outputs (Remote and Reset)
  • ‘Class change’ and alert inputs
  • Installer-friendly design accommodates easy first fix and straightforward maintenance
  • Attractive flush or surface mountable plastic lid and enclosure - no bezel required
  • Low quiescent current
  • Multiple indicators
  • End of line units included (one per zone)
  • Ancillary system expansion connections provided for up to eight two-wire repeaters (one CFP761 network driver card required per system) and optional CFP relay boards
  • Space for two x 12V 3.3Ah VRLA batteries
  • Third-party LPCB tested