Haes Elan Remote Display Terminal With Standard Network Card - HS-5010
The HS-5010 is a Remote Display Terminal (RDT) while the HS-5020 is a fully functional Remote Conntrol Terminal (RCT).
The remote terminals utilise the same graphical LCD user interface that can be found on the HS-5000 series re panels and are based upon the same advanced, ash based, microprocessor technology.
All HS-5000 series panels and remote terminals can communicate over the same 2-core network cable.
The ‘Ad-NeT’ network operates as a true peer-to-peer system with full cross panel reporting, control and cause and eect functionality of up to 2000 zones.
All remote terminals incorporate buzzer mute, view, enable/disable and test facilities with dedicated system and navigation keys for simple user control.
The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms.
Main Features
• Display only or full control terminal
• Standard network & fault tolerant models available
• Programmable switch inputs
• The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset
• Fully on-site programmable via on-board alphanumeric keypad or PC configuration tools
• By using ‘flash-memory’ and an advanced graphical display the remote terminals can be easily configured to operate in
virtually any language, with any character set and allows for the installers logo and company details to be displayed on the
LCD display during normal operation
Haes Technologies
Haes Technologies
Haes Technologies
Haes Technologies
