Advanced Go1 Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) - Go1

Advanced Go1 Single Loop Fire Alarm Panel (Apollo/Hochiki Protocol) - Go1

The new Advanced Go series is an evolution for non-networked single-loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features, while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.

A new ergonomic layout of control panel is combined with our high resolution, high contrast, graphical LCD display. The tactile keypad allows simple select-and-click programming for faster engineer configuration and simple end-user operation.

Two performance options are available with a different maximum number of configurable addresses, allowing greater flexibility for site-specific installations: Go and Go+.

Maximum  addresses         Apollo (Discovery, XP95)   Hochiki (ESP)     

Go                                                 50                                      50                       

Go+                                              126                                    127                     

Functional improvements include integral zonal LEDs which enable instant identification of alarm locations, and ensure compliance with BS5839 without the cost of a separate LED zone card.

The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed microprocessor technology, for 9 times faster operation than MxPro 4.

Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications, from small to medium systems.

All Go series panels are fully programmable on site via the control panel display or with our updated, easy-to-use PC Configuration Tool

Features: 

• Multiprotocol support, Apollo (Discovery, XP95), Hochiki (ESP) 
• Graphical LCD  user interface, LED indicators & push buttons 
• Installer-friendly Auto-learn, Loop detection and On-board scope facility
• 500 fire + 5000 general event logging, with advanced diagnostic precision to aid installation & fault-finding
• Integral 15 Zone LEDs ensures compliance with BS5839, with 35 additional software indication zones
• Uses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programming
• Two on-board Sounder outputs, three on-board Relay outputs
• Optional 3 monitored input/outputs for Fire/Fault routing (with P-Bus adaptor & routing card) for full EN54 compliance when connected to an Alarm Receiving Centre
• Dedicated USB Type B port for direct PC connection
• Ethernet port for Cloud connection via AdvancedLive, to provide remote notification and panel management
• Innovative 'no hinge' removable door and hangable chassis for easier installation 
• Employing an identical monitoring feature as the Mx-5000 series, the Go series meets the requirements of EN54-13 (2005) Clauses 5.3.4.1 and 5.3.4.2 (partial open & short circuits) for optimal fire system performance and complete peace of mind